A New Band

Late last December I dressed three of my looms to "start the New Year off right" without naked looms. Then the looms sat, mostly untouched. Well, I finally have the smallest of the projects finished. It's just an Inkle band, but it is one I do have a purpose for.

Years ago I bought myself a medical alert bracelet that you can buy interchangeable bracelets for. They are expensive, so right from the start I was determined to make my own. Initially I tried making beaded bracelets, but they had a tendency to break and, with that, came the risk of losing them. 

I then tried making decorative Inkle band bracelets for it, and that was far more successful. I have quite a collection of them now, and often make them so that they coordinate with items in my wardrobe.

This is the newest bracelet and it's made from that recently finished Inkle band. I often get questions from Inkle weaving enthusiasts wanting new and creative uses for their beautiful bands, so I'll answer them here.

The findings I finish the bands with are available through Etsy, and if you are lucky, sometimes you can find them at local beading supply stores. The ends that finish the band are called "ribbon ends" and I connect those to the lobster claw clasps with split rings.

The tools I use are flat round pliers that I use to get a good grip on the split ring when I am turning it to feed it onto the ribbon ends and lobster claws, flat round nylon jaw jewelry pliers which I use to close the ribbon ends without damaging them, and split ring pliers used for opening the split rings. Those last pliers are less expensive if you pick them up from a fishing supply store. 

To prevent the cut Inkle band from fraying and possibly pulling out of the end findings, I use a good glue that works for joining porous and non-porous materials before I pinch those end findings closed.

My personal preference is to aim for a fit that is close enough that it doesn't move around on my arm, but long enough that it is still easy enough to do up.

In case you're curious, I wear a medic alert bracelet any time I leave the house because I have a couple of severe allergies, one of which would be unexpected by the medical community and could be life threatening if I was unconscious and could not warn them.

Rolled Tight In Boro

I was given a nice set of ergonomic crochet hooks for Christmas, but they needed a safe home so I set about making a custom roll to store them in.

 

I wove the Inkle band tie that holds the roll closed quite some time ago. It's nice that it finally has a use. 

The inner part of the roll has numerous slots that are custom sized to hold the varying handle widths on my crochet hook collection. Each slot in the roll has the size written on it so that it's easier to find what I want and also easier to put the hooks away when I'm finished. 

Unfortunately after the slots were all labelled and sewn I found an errant hook stuck in an abandoned project. That hook must now reside, out of order, in an unlabeled space that I had at the end of the roll. 

I've had  a roll of printed fabric labels that read: "Marlene Randall ORIGINAL" for decades now. I believe they were purchased nearly 40 years ago and this may be the very first time I've used one.

I'm very happy with this project and I hope that it will get decades of use and perhaps one day become an heirloom.

The outer cover of the roll was a very labor intense project!

It is boro style patchwork and the entire surface is completely covered in running stitches travelling in all different directions. 

 

That type of stitching is very characteristic of this style of patchwork.

Old FO becomes New FO

This inkle band is an old finished project. Long ago I made a small portion of it into a band for my medic alert bracelet. Today I took what remained of that band and I made a lanyard for my new ocarina. 

I'll eventually make a little bag to protect it when not in use.

But for now I'm busy driving my husband crazy practicing the ocarina several times a day.

Denim Statement Piece

Here's another pendant made using the basic ideas gleaned during the "Make a Statement" multi-media course presented online by Gwenn Lafleur. This particular one is my version of the "medicine bag". It forms a pocket for whatever special trinkets a person might wish to carry. 

I made the base of mine from an Inkle band that had been woven on my Saori CH60 floor loom for another purpose, but it turned out too wide. I repurposed it, and through some folding, fashioned it into an open pocket on the back. To form a "bezel" for the top of the pendant I folded the fabric over a plastic straw creating a reinforced casing. A tubular Inkle band, created on my Windhaven Ukulele Inkle Loom, passes through the straw in the casing. 

Both Inkle bands made use of weaving cotton given to me by a friend when she was moving to a new community. I believe it was originally part of the stash of another mutual friend and former guild member. In fact, all components of the pendant have special meaning to me.

All three of the buttons used came from a huge button jar that originally belonged to my grandmother and was handed down to my mother, and now to me. The buttons themselves may or may not be old since each of us has added to the collection over the years.

The pale blue lace surrounding the stacked buttons is a scrap leftover from making tiny doll clothing, another hobby of mine.

The frayed denim at the bottom edge is the hem of a discarded pair of my husband's jeans.

The large silver beads along the top, just below the casing, are from a broken necklace. Those beads are nestled into a small piece of tatting that I did years ago while learning shuttle tatting.

The thin blue fabric with white polka dots in the upper right corner is an ancient old, completely worn to tatters, handkerchief that belonged to my husband and perhaps might have originally been my dad's?

The little silver dragonfly was a gift from a friend that knows I have a special affection for dragonflies.

The small dark blue beads scattered beside the dragonfly are leftovers from an intricate beaded shawl that took many months to knit.

Arching down the left side is a piece of an heirloom crocheted doily. It was stained and there were holes in it so it had just been tucked away, unused. I'm hoping this use is more honoring of the original craftswoman.

The embroidery embellishing the fabric that runs diagonally across the middle of the piece was done using floss inherited from my mother.

I'm very pleased with this pendant. I think I'll wear it a lot, denim being such a wardrobe staple. 

Wardrobe of Wristbands

The jewelry findings I have been waiting for for months have finally arrived. Now some of the Inkle bands I've been weaving can be made into wristbands that will work with my medical ID bracelet.

The lobster clasps hook into both sides of the information disk making the bracelets interchangeable. 

The information portion sits relatively hidden on the underside of my wrist,

While the more decorative Inkle band shows on the top. 

I've made beaded versions before but the Inkle band ones are incredibly comfortable and are easy and inexpensive to make. 

When a Project Goes Well

I'm thrilled with the way this turned out! Despite winging it without a pattern, improvising all the way, everything still went together perfectly. Many decisions were based solely on supplies at hand.

• I had all the cotton denim yarn, purchased at a clearance sale months ago.


• The bright orange acrylic was leftover yarn given to me by my daughter.


• Who doesn't have a pair of holey old jeans kicking around?


• I even had leftover thread in the right colours.


• I had the perfect buttons purchased long ago for a project that I changed my mind about.


• The inkle band, cut in two, turned out to be exactly the right length to make shoulder straps that place the bag at a comfortable carrying height.


• The inner pockets were made from a scrap leftover from the main lining.


• The plastic canvas was in my stash, previously rescued from a thrift store for next to nothing.


• The bag turned out a nice size and shape simply by cutting the woven yardage exactly in half.

The only things I had to buy specifically for the project were the fusible interfacing (to stablize the weave so it could be cut and sewn), and the bright orange broadcloth for the lining. Both of those I got at a local department store. I didn't even have to set foot into our big (annoying, high priced, slow service) fabric store.

All the details would have taken less time if I had had a commercial pattern to refer to. As it was I had to stop and carefully think about how best to accomplish the features I wanted. The bottom and the narrower sides were given some stability with plastic canvas basted invisibly between the layers. The inside was lined, complete with six customized pockets, four flat ones of various sizes, and two pleated ones for bulkier objects.

With the exception of the inkle bands, I have enough of everything left over to make another whole bag.
I haven't decided yet whether I will do that and sell the extra one, or if I will buy a pattern for some kind of lined purse. Either way it won't be anytime soon. Sewing isn't my favourite hobby. Although I did a fair bit of it years ago, now I only sew when it is a necessary step for finishing some other fibre related project.