Use Fray Check on all edges to reduce fraying.
Press up the ¼” hem allowance and top stitch in place.
Match CF edges, right sides together and sew seam. Trim seam allowance to 1/8” in crotch area, and press seam open.
Press down 3/8” casing for elastic, wrong sides together.
Measure and mark a piece of ¼” elastic at 3 ¼” . Do NOT cut!
Place the elastic next to fold line, under the pressed casing, butting the unmarked end of the elastic up to the raw edge of the pants piece. Take a couple of small stitches forward and back through the elastic and both layers of fabric and leave the sewing machine needle down.
Hold onto the thread tails behind the machine---------
---------- while you stretch the elastic until your measured mark is even with the opposite side of the pattern piece.
Sew a second line of machine stitches below the first. It’s decorative, but it also holds down the extra width of the casing.
Sew CB seam. Trim to 1/8” width in the crotch area. Press seam open.
Match inseams and pin at cuffs and crotch seam.
Sew, then trim to 1/8” in the crotch area.
Press seam open. A wooden dowel is a handy tool for this task.
Turn pants right side out.
A "tube turner" tool is wonderful for turning these little pant legs.
Ta da! You’re done!



